Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Wanpipe 7 Driver problem with Debian 8.5 (Sangoma B600DE)


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
guillermo.didonato at ...
Guest





PostPosted: Tue Sep 13, 2016 1:10 pm    Post subject: [asterisk-users] Wanpipe 7 Driver problem with Debian 8.5 (S Reply with quote

Hi all,


I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian 8.5 (Jessie) server, but when I reach to the point where I have to enter the Linux Headers directory (installed in default with “apt-get install linux-headers-$(uname -r)”), I get an error, the package refuses to compile and installation aborts.


If I try the same process with Debian 7 (Wheezy), installation works just fine.


Has anybody gone trough this scenario? Has anybody managed to have Snagoma B600DE working on Debian 8.5?


Regards,



Guillermo
Back to top
jb_soft at trink.co.uk
Guest





PostPosted: Tue Sep 13, 2016 5:53 pm    Post subject: [asterisk-users] Wanpipe 7 Driver problem with Debian 8.5 (S Reply with quote

Hello Guillermo,

On Tuesday, September 13, 2016, 7:10:29 PM, you wrote:

Quote:
I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian
8.5 (Jessie) server, but when I reach to the point where I have to
enter the Linux Headers directory (installed in default with
“apt-get install linux-headers-$(uname -r)”), I get an error, the
package refuses to compile and installation aborts.

Wanpipe installs fill me with dread! Sangoma say that they only
support CentOS 6.x installs, and after many struggles to get Wanpipe
to work on Fedora versions, that is what I run it on (CentOS 6.7).
Even then, install issues are not uncommon, and it seems to be
particularly sensitive to kernel issues - I avoid kernel updates on my
Asterisk box!

I am currently running with kernel 2.6.32. Sangoma says that Wanpipe
will work on 4.3 kernels, but if your kernel is newer than 4.3
(November 2015) then that might be your problem.
"setup_drv_compile.log" is the place to look for clues. You should
find it in the directory where your Wanpipe source files are.



--
Best regards,
Julian mailto:jb_soft@trink.co.uk


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
http://www.asterisk.org/community/astricon-user-conference

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
guillermo.didonato at ...
Guest





PostPosted: Thu Sep 15, 2016 6:12 am    Post subject: [asterisk-users] Wanpipe 7 Driver problem with Debian 8.5 (S Reply with quote

Thank you very much for your feedback Julian. I agree with you, Wanpipe is a pain to install. For the moment I will stick to Debian Wheezy (kernel 3.2), but it bothers me not to be able to go for a complete distro update. Let´s see if somebody else had luck with this process.


Best regards,
Guillermo






On Tue, Sep 13, 2016 at 7:51 PM, Julian Beach <jb_soft@trink.co.uk (jb_soft@trink.co.uk)> wrote:
Quote:
Hello Guillermo,

On Tuesday, September 13, 2016, 7:10:29 PM, you wrote:

Quote:
I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian
8.5 (Jessie) server, but when I reach to the point where I have to
enter the Linux Headers directory (installed in default with
“apt-get install linux-headers-$(uname -r)”), I get an error, the
package refuses to compile and installation aborts.

Wanpipe installs fill me with dread! Sangoma say that they only
support CentOS 6.x installs, and after many struggles to get Wanpipe
to work on Fedora versions, that is what I run it on (CentOS 6.7).
Even then, install issues are not uncommon, and it seems to be
particularly sensitive to kernel issues - I avoid kernel updates on my
Asterisk box!

I am currently running with kernel 2.6.32. Sangoma says that Wanpipe
will work on 4.3 kernels, but if your kernel is newer than 4.3
(November 2015) then that might be your problem.
"setup_drv_compile.log" is the place to look for clues. You should
find it in the directory where your Wanpipe source files are.



--
Best regards,
 Julian                            mailto:jb_soft@trink.co.uk (jb_soft@trink.co.uk)


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
      http://www.asterisk.org/community/astricon-user-conference

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services