VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
dan at amtelco.com Guest
|
Posted: Thu Aug 06, 2020 11:53 am Post subject: [asterisk-users] Is it possible to use Stasis to control bot |
|
|
I understand how to control the first local channel, but an having trouble getting the second local channel to enter stasis.
I setup have the following extensions.conf to handle 1000 (basically had it setup so if first stasis not there try second, but believe second channel never processes the dial plan so even if second line was hello-world2 it would not matter.
[mycontext]
exten => 1000,1,NoOp()
same => n,Stasis(hello-world)
same => n,GotoIf($[${STASISSTATUS}=FAILED]?IS_hello_world2:stasis_done)
same => n(IS_hello_world2),Stasis(hello-world2)
same => n(stasis_done),Hangup()
For testing, I am using curl
curl -v -u asterisk:asterisk -X POST http://asterisk:asterisk@localhost:8088/ari/channels/create?endpoint=local/1000@mycontext &app=hello-world2&context=mycontext&channelId=mycallerid.1&otherChannelId=mycallerid.2&formats=ulaw
I see the primary call on my hello-world2 stasis, but I never see anything for the second leg of the local channel. I have an AMI connection and see both channels there, but the send local channel seems to not process the dial plan. Can someone tell me if this is possible and if so what am I doing wrong?
Here is the AMI for the two local channel
Event: Newchannel
Privilege: call,all
Channel: Local/1000@mycontext-0000000b;1
ChannelState: 0
ChannelStateDesc: Down
CallerIDNum: <unknown>
CallerIDName: <unknown>
ConnectedLineNum: <unknown>
ConnectedLineName: <unknown>
Language: en
AccountCode:
Context: mycontext
Exten: 1000
Priority: 1
Uniqueid: mycallerid.1
Linkedid: mycallerid.1
Event: Newchannel
Privilege: call,all
Channel: Local/1000@mycontext-0000000b;2
ChannelState: 4
ChannelStateDesc: Ring
CallerIDNum: <unknown>
CallerIDName: <unknown>
ConnectedLineNum: <unknown>
ConnectedLineName: <unknown>
Language: en
AccountCode:
Context: mycontext
Exten: 1000
Priority: 1
Uniqueid: mycallerid.2
Linkedid: mycallerid.1
< {
"type": "ChannelDialplan",
"timestamp": "2020-08-06T11:37:50.531-0500",
"dialplan_app": "Stasis",
"dialplan_app_data": "hello-world2",
"channel": {
"id": "mycallerid.1",
"name": "Local/1000@mycontext-0000000b;1",
"state": "Down",
"caller": {
"name": "",
"number": ""
},
"connected": {
"name": "",
"number": ""
},
"accountcode": "",
"dialplan": {
"context": "mycontext",
"exten": "1000",
"priority": 1,
"app_name": "Stasis",
"app_data": "hello-world2"
},
"creationtime": "2020-08-06T11:37:50.531-0500",
"language": "en"
},
"asterisk_id": "00:15:5d:8e:01:38",
"application": "hello-world2"
}
< {
"variable": "STASISSTATUS",
"value": "",
"type": "ChannelVarset",
"timestamp": "2020-08-06T11:37:50.531-0500",
"channel": {
"id": "mycallerid.1",
"name": "Local/1000@mycontext-0000000b;1",
"state": "Down",
"caller": {
"name": "",
"number": ""
},
"connected": {
"name": "",
"number": ""
},
"accountcode": "",
"dialplan": {
"context": "mycontext",
"exten": "1000",
"priority": 1,
"app_name": "Stasis",
"app_data": "hello-world2"
},
"creationtime": "2020-08-06T11:37:50.531-0500",
"language": "en"
},
"asterisk_id": "00:15:5d:8e:01:38",
"application": "hello-world2"
}
< {
"type": "StasisStart",
"timestamp": "2020-08-06T11:37:50.531-0500",
"args": [],
"channel": {
"id": "mycallerid.1",
"name": "Local/1000@mycontext-0000000b;1",
"state": "Down",
"caller": {
"name": "",
"number": ""
},
"connected": {
"name": "",
"number": ""
},
"accountcode": "",
"dialplan": {
"context": "mycontext",
"exten": "1000",
"priority": 1,
"app_name": "Stasis",
"app_data": "hello-world2"
},
"creationtime": "2020-08-06T11:37:50.531-0500",
"language": "en"
},
"asterisk_id": "00:15:5d:8e:01:38",
"application": "hello-world2"
}
Here are the AMI
Event: Newchannel
Privilege: call,all
Channel: Local/1000@mycontext-0000000b;1
ChannelState: 0
ChannelStateDesc: Down
CallerIDNum: <unknown>
CallerIDName: <unknown>
ConnectedLineNum: <unknown>
ConnectedLineName: <unknown>
Language: en
AccountCode:
Context: mycontext
Exten: 1000
Priority: 1
Uniqueid: mycallerid.1
Linkedid: mycallerid.1
Event: Newchannel
Privilege: call,all
Channel: Local/1000@mycontext-00000007;2
ChannelState: 4
ChannelStateDesc: Ring
CallerIDNum: <unknown>
CallerIDName: <unknown>
ConnectedLineNum: <unknown>
ConnectedLineName: <unknown>
Language: en
AccountCode:
Context: mycontext
Exten: 1000
Priority: 1
Uniqueid: mycallerid.2
Linkedid: mycallerid.1
Dan |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcolp at sangoma.com Guest
|
Posted: Thu Aug 06, 2020 12:06 pm Post subject: [asterisk-users] Is it possible to use Stasis to control bot |
|
|
On Thu, Aug 6, 2020 at 1:52 PM Dan Cropp <dan@amtelco.com (dan@amtelco.com)> wrote:
Quote: |
I understand how to control the first local channel, but an having trouble getting the second local channel to enter stasis.
I setup have the following extensions.conf to handle 1000 (basically had it setup so if first stasis not there try second, but believe second channel never processes the dial plan so even if second line was hello-world2 it would not matter.
|
What does the console show is actually happening with the channel?
--
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
dan at amtelco.com Guest
|
Posted: Thu Aug 06, 2020 12:13 pm Post subject: [asterisk-users] Is it possible to use Stasis to control bot |
|
|
Hi Joshua,
Thanks for responding.
Please disregard, I just figured out the using the originate approach solved my problem.
curl -v -u asterisk:asterisk -X POST "http://asterisk:asterisk@localhost:8088/ari/channels/mycallerid.1?endpoint=local/1000@mycontext&app=hello-world2&extension=1000&context=mycontext&priority=1&channelId=mycallerid.1&otherChannelId=mycallerid.2&formats=ulaw&timeout=30"
Have a good day!
Dan
From: asterisk-users <asterisk-users-bounces@lists.digium.com> On Behalf Of Joshua C. Colp
Sent: Thursday, August 6, 2020 12:05 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>
Subject: Re: [asterisk-users] Is it possible to use Stasis to control both legs of a Local channel created using ARI?
On Thu, Aug 6, 2020 at 1:52 PM Dan Cropp <dan@amtelco.com (dan@amtelco.com)> wrote:
Quote: |
I understand how to control the first local channel, but an having trouble getting the second local channel to enter stasis.
I setup have the following extensions.conf to handle 1000 (basically had it setup so if first stasis not there try second, but believe second channel never processes the dial plan so even if second line was hello-world2 it would not matter.
|
What does the console show is actually happening with the channel?
--
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|