VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
john at xaccel.net Guest
|
Posted: Fri Aug 07, 2020 4:33 pm Post subject: [asterisk-users] Confbridge |
|
|
To all:
No matter what I try, I cannot get the system to wait for the admin to join. It just dumps users into the bridge directly.
I do not have a pin for users, does that matter?
What am I missing?
Another issue the absolute timeout is not working ? … have recordings that last for over 24 hours… and this should not happen…
All calls should hangup after 4 ?
Any ideas ?
Any help is much appreciated.
Thanks
This is my dialplan.
exten => s,1,Wait(1)
exten => s,n,Answer
exten => s,n,Set(TIMEOUT(absolute)=14400)
exten => s,n,NoOp(${CALLERID(name)})
exten => s,n,NoOp(${CALLERID(num)})
exten => s,n,NoOp()
exten => s,n,Playback(church) ; "Please hold while..."
exten => s,n,Set(CONFBRIDGE(user,announce_join_leave)=no)
exten => s,n,Set(CONFBRIDGE(user,startmuted)=yes)
exten => s,n,Set(CONFBRIDGE(user,template)=church)
exten => s,n,Set(CONFBRIDGE(user,marked)=no)
exten => s,n,Set(CONFBRIDGE(user,wait_marked)=yes)
exten => s,n,Set(CONFBRIDGE(user,end_marked)=yes)
exten => s,n,ConfBridge(xaccel)
exten => s,n,hangup
confbridge.conf
[general]
[church]
type=user
startmuted=yes
announce_join_leave=no
announce_user_count=no
wait_marked=yes
end_marked=yes
music_on_hold_when_empty=no
quiet=yes
;
[xaccel]
type=bridge
record_conference=yes
;
Then calling in I see this
Conference Bridge Name Users Marked Locked Muted
================================ ====== ====== ====== =====
xaccel 1 0 No No
John Bittner
CTO
380 US Highway 46, Suite 500
Totowa, NJ 07512
Phone: 201.806.2602 x2405
Fax: 201.806.2604
Cell: 973.390.1090
www.xaccel.net
CONFIDENTIALITY NOTICE:
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential
and privileged information which should not be shared or forwarded. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the e-mail. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sbasan at bluebe.net Guest
|
Posted: Fri Aug 07, 2020 5:35 pm Post subject: [asterisk-users] Confbridge |
|
|
John,
What you see it's how it should be.
The wait for admin means that all users join the conference room but the conference is not started and they all should hear MOH.
When the admin will join then the conference will start and all will hear the admin (or all others if they are not muted)
Office: +972-77-6662000 E-mail: office@bluebe.net (office@bluebe.net)
Fax: +972-77-6662020 Web: http://www.bluebe.net
From: asterisk-users [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of John T. Bittner
Sent: Saturday, August 8, 2020 12:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussionţ <asterisk-users@lists.digium.com>
Subject: [asterisk-users] Confbridge
To all:
No matter what I try, I cannot get the system to wait for the admin to join. It just dumps users into the bridge directly.
I do not have a pin for users, does that matter?
What am I missing?
Another issue the absolute timeout is not working ? … have recordings that last for over 24 hours… and this should not happen…
All calls should hangup after 4 ?
Any ideas ?
Any help is much appreciated.
Thanks
This is my dialplan.
exten => s,1,Wait(1)
exten => s,n,Answer
exten => s,n,Set(TIMEOUT(absolute)=14400)
exten => s,n,NoOp(${CALLERID(name)})
exten => s,n,NoOp(${CALLERID(num)})
exten => s,n,NoOp()
exten => s,n,Playback(church) ; "Please hold while..."
exten => s,n,Set(CONFBRIDGE(user,announce_join_leave)=no)
exten => s,n,Set(CONFBRIDGE(user,startmuted)=yes)
exten => s,n,Set(CONFBRIDGE(user,template)=church)
exten => s,n,Set(CONFBRIDGE(user,marked)=no)
exten => s,n,Set(CONFBRIDGE(user,wait_marked)=yes)
exten => s,n,Set(CONFBRIDGE(user,end_marked)=yes)
exten => s,n,ConfBridge(xaccel)
exten => s,n,hangup
confbridge.conf
[general]
[church]
type=user
startmuted=yes
announce_join_leave=no
announce_user_count=no
wait_marked=yes
end_marked=yes
music_on_hold_when_empty=no
quiet=yes
;
[xaccel]
type=bridge
record_conference=yes
;
Then calling in I see this
Conference Bridge Name Users Marked Locked Muted
================================ ====== ====== ====== =====
xaccel 1 0 No No
John Bittner
CTO
380 US Highway 46, Suite 500
Totowa, NJ 07512
Phone: 201.806.2602 x2405
Fax: 201.806.2604
Cell: 973.390.1090
www.xaccel.net
CONFIDENTIALITY NOTICE:
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential
and privileged information which should not be shared or forwarded. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the e-mail. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|