Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] Registration issue with Polycom


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
craig.a.guy at gmail.com
Guest





PostPosted: Fri Aug 22, 2008 8:45 pm    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

Hi,

I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?

#
U 203.23.223.109:5076 -> 4.53.88.29:5060
REGISTER sip:4.53.88.29 SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.
From: "Craig Guy" <sip:1001@4.53.88.29>;tag=914B0517-5EB6FA00.
To: <sip:1001@4.53.88.29>.
CSeq: 1 REGISTER.
Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1.
Contact: <sip:1001@203.23.223.109:5076>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".
User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.
Max-Forwards: 70.
Expires: 3600.
Content-Length: 0.
.

#
U 4.53.88.29:5060 -> 203.23.223.109:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.
From: "Craig Guy" <sip:1001@4.53.88.29>;tag=914B0517-5EB6FA00.
To: <sip:1001@4.53.88.29>;tag=7U95e600jSH5e.
Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1.
CSeq: 1 REGISTER.
User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.
Supported: 100rel, timer, precondition, path, replaces.
WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".
Content-Length: 0.
.
Back to top
brian at freeswitch.org
Guest





PostPosted: Fri Aug 22, 2008 8:54 pm    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

I'm going to gues that nat is involved... and the polycom doesn't rfc3581 so you'll need to turn on NDLB-force-rport on the sip profile so we respond on the port we received the initial inbound registration from. Notice it comes in from 5076.. yet we 401 it to 5060.... This is the reason the polycom is number two on my list.

/b

On Aug 22, 2008, at 8:43 PM, Craig Guy wrote:
Quote:
Hi,

I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?

#
U 203.23.223.109:5076 -> 4.53.88.29:5060
REGISTER [url=sip:4.53.88.29]sip:4.53.88.29[/url] SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.
From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.
To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>.
CSeq: 1 REGISTER.
Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).
Contact: <[url=sip:1001@203.23.223.109:5076]sip:1001@203.23.223.109:5076[/url]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".
User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.
Max-Forwards: 70.
Expires: 3600.
Content-Length: 0.
.

#
U 4.53.88.29:5060 -> 203.23.223.109:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.
From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.
To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=7U95e600jSH5e.
Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).
CSeq: 1 REGISTER.
User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.
Supported: 100rel, timer, precondition, path, replaces.
WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".
Content-Length: 0.
.

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

Back to top
craig.a.guy at gmail.com
Guest





PostPosted: Fri Aug 22, 2008 9:21 pm    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

Thankyou – I will try that.

Craig

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Saturday, 23 August 2008 9:52 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Registration issue with Polycom



I'm going to gues that nat is involved... and the polycom doesn't rfc3581 so you'll need to turn on NDLB-force-rport on the sip profile so we respond on the port we received the initial inbound registration from. Notice it comes in from 5076.. yet we 401 it to 5060.... This is the reason the polycom is number two on my list.


/b


On Aug 22, 2008, at 8:43 PM, Craig Guy wrote:




Hi,



I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?



#

U 203.23.223.109:5076 -> 4.53.88.29:5060

REGISTER [url=sip:4.53.88.29]sip:4.53.88.29[/url] SIP/2.0.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>.

CSeq: 1 REGISTER.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

Contact: <[url=sip:1001@203.23.223.109:5076]sip:1001@203.23.223.109:5076[/url]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".

User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.

Max-Forwards: 70.

Expires: 3600.

Content-Length: 0.

.



#

U 4.53.88.29:5060 -> 203.23.223.109:5060

SIP/2.0 401 Unauthorized.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=7U95e600jSH5e.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

CSeq: 1 REGISTER.

User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.

Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.

Supported: 100rel, timer, precondition, path, replaces.

WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".

Content-Length: 0.

.


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
craig.a.guy at gmail.com
Guest





PostPosted: Sat Aug 23, 2008 5:06 am    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

Hi Brian,

I suspect that FS may not like the contact header in the sip REGISTER request. The source port of the REGISTER is 5076, the contact header also specifies port 5076, and there is no mention of port 5060 anywhere in the REGISTER message itself. Note that the Polycom has appended ‘methods=’ to the contact header. I’m not familiar enough with the RFC to know if this is valid for the contact header, but I won’t rule out that this additional stuff on the contact header is causing FS to discard it and use port 5060 instead of the requested 5076.

Neither of my Snom or Billion contact headers are formatted this way. I might see if I can find a Polycom firmware update and see if that changes the header.

Craig

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Saturday, 23 August 2008 9:52 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Registration issue with Polycom



I'm going to gues that nat is involved... and the polycom doesn't rfc3581 so you'll need to turn on NDLB-force-rport on the sip profile so we respond on the port we received the initial inbound registration from. Notice it comes in from 5076.. yet we 401 it to 5060.... This is the reason the polycom is number two on my list.


/b


On Aug 22, 2008, at 8:43 PM, Craig Guy wrote:




Hi,



I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?



#

U 203.23.223.109:5076 -> 4.53.88.29:5060

REGISTER [url=sip:4.53.88.29]sip:4.53.88.29[/url] SIP/2.0.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>.

CSeq: 1 REGISTER.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

Contact: <[url=sip:1001@203.23.223.109:5076]sip:1001@203.23.223.109:5076[/url]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".

User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.

Max-Forwards: 70.

Expires: 3600.

Content-Length: 0.

.



#

U 4.53.88.29:5060 -> 203.23.223.109:5060

SIP/2.0 401 Unauthorized.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=7U95e600jSH5e.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

CSeq: 1 REGISTER.

User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.

Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.

Supported: 100rel, timer, precondition, path, replaces.

WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".

Content-Length: 0.

.


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
brian at freeswitch.org
Guest





PostPosted: Sat Aug 23, 2008 10:51 am    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

Its the lack of rport and if you put NDLB-force-rport it will work. I'm 100% sure of that.

/b

On Aug 23, 2008, at 5:01 AM, Craig Guy wrote:
Quote:
Hi Brian,

I suspect that FS may not like the contact header in the sip REGISTER request. The source port of the REGISTER is 5076, the contact header also specifies port 5076, and there is no mention of port 5060 anywhere in the REGISTER message itself. Note that the Polycom has appended ‘methods=’ to the contact header. I’m not familiar enough with the RFC to know if this is valid for the contact header, but I won’t rule out that this additional stuff on the contact header is causing FS to discard it and use port 5060 instead of the requested 5076.

Neither of my Snom or Billion contact headers are formatted this way. I might see if I can find a Polycom firmware update and see if that changes the header.

Craig


Brian West
[url=sip:brian@freeswitch.org]sip:brian@freeswitch.org[/url]
Back to top
brian at freeswitch.org
Guest





PostPosted: Sat Aug 23, 2008 11:02 am    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

The problem is the Polycom is behind NAT. Right? It has nothing to do with the contact header...

Add this to your sofia profile:


<param name="NDLB-force-rport" value="true"/>


/b



On Aug 23, 2008, at 5:01 AM, Craig Guy wrote:
Quote:
Hi Brian,

I suspect that FS may not like the contact header in the sip REGISTER request. The source port of the REGISTER is 5076, the contact header also specifies port 5076, and there is no mention of port 5060 anywhere in the REGISTER message itself. Note that the Polycom has appended ‘methods=’ to the contact header. I’m not familiar enough with the RFC to know if this is valid for the contact header, but I won’t rule out that this additional stuff on the contact header is causing FS to discard it and use port 5060 instead of the requested 5076.

Neither of my Snom or Billion contact headers are formatted this way. I might see if I can find a Polycom firmware update and see if that changes the header.

Craig

From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Brian West
Sent: Saturday, 23 August 2008 9:52 AM
To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Registration issue with Polycom



I'm going to gues that nat is involved... and the polycom doesn't rfc3581 so you'll need to turn on NDLB-force-rport on the sip profile so we respond on the port we received the initial inbound registration from. Notice it comes in from 5076.. yet we 401 it to 5060.... This is the reason the polycom is number two on my list.


/b


On Aug 22, 2008, at 8:43 PM, Craig Guy wrote:




Hi,



I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?



#

U 203.23.223.109:5076 -> 4.53.88.29:5060

REGISTER [url=sip:4.53.88.29]sip:4.53.88.29[/url] SIP/2.0.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>.

CSeq: 1 REGISTER.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

Contact: <[url=sip:1001@203.23.223.109:5076]sip:1001@203.23.223.109:5076[/url]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".

User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.

Max-Forwards: 70.

Expires: 3600.

Content-Length: 0.

.



#

U 4.53.88.29:5060 -> 203.23.223.109:5060

SIP/2.0 401 Unauthorized.

Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.

From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.

To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=7U95e600jSH5e.

Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).

CSeq: 1 REGISTER.

User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.

Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.

Supported: 100rel, timer, precondition, path, replaces.

WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".

Content-Length: 0.

.


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org





_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



Brian West
[url=sip:brian@freeswitch.org]sip:brian@freeswitch.org[/url]
Back to top
craig.a.guy at gmail.com
Guest





PostPosted: Sat Aug 23, 2008 8:37 pm    Post subject: [Freeswitch-users] Registration issue with Polycom Reply with quote

Thanks Brian,

That’s enabled it to register and place calls.

Craig

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Sunday, 24 August 2008 12:01 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Registration issue with Polycom



The problem is the Polycom is behind NAT. Right? It has nothing to do with the contact header...


Add this to your sofia profile:



<param name="NDLB-force-rport" value="true"/>



/b




On Aug 23, 2008, at 5:01 AM, Craig Guy wrote:




Hi Brian,



I suspect that FS may not like the contact header in the sip REGISTER request. The source port of the REGISTER is 5076, the contact header also specifies port 5076, and there is no mention of port 5060 anywhere in the REGISTER message itself. Note that the Polycom has appended ‘methods=’ to the contact header. I’m not familiar enough with the RFC to know if this is valid for the contact header, but I won’t rule out that this additional stuff on the contact header is causing FS to discard it and use port 5060 instead of the requested 5076.



Neither of my Snom or Billion contact headers are formatted this way. I might see if I can find a Polycom firmware update and see if that changes the header.



Craig



From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Brian West
Sent: Saturday, 23 August 2008 9:52 AM
To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Registration issue with Polycom





I'm going to gues that nat is involved... and the polycom doesn't rfc3581 so you'll need to turn on NDLB-force-rport on the sip profile so we respond on the port we received the initial inbound registration from. Notice it comes in from 5076.. yet we 401 it to 5060.... This is the reason the polycom is number two on my list.




/b




On Aug 22, 2008, at 8:43 PM, Craig Guy wrote:







Hi,





I’ve got an issue trying to register a Polycom IP320 against FS 1.0.1, as below the Polycom is coming from and registering with a contact port 5076, however FS is sending the 401 to port 5060. Any ideas? I have a Snom registering successfully as 1000 from behind a different NAT. Any ideas?





#


U 203.23.223.109:5076 -> 4.53.88.29:5060


REGISTER [url=sip:4.53.88.29]sip:4.53.88.29[/url] SIP/2.0.


Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3.


From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.


To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>.


CSeq: 1 REGISTER.


Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).


Contact: <[url=sip:1001@203.23.223.109:5076]sip:1001@203.23.223.109:5076[/url]>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".


User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.


Max-Forwards: 70.


Expires: 3600.


Content-Length: 0.


.





#


U 4.53.88.29:5060 -> 203.23.223.109:5060


SIP/2.0 401 Unauthorized.


Via: SIP/2.0/UDP 192.168.1.1;branch=z9hG4bK7db8749a8ECDE4D3;received=203.23.223.109.


From: "Craig Guy" <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=914B0517-5EB6FA00.


To: <[url=sip:1001@4.53.88.29]sip:1001@4.53.88.29[/url]>;tag=7U95e600jSH5e.


Call-ID: 7ef2a3fc-a794db15-262aa31e@192.168.1.1 (7ef2a3fc-a794db15-262aa31e@192.168.1.1).


CSeq: 1 REGISTER.


User-Agent: FreeSWITCH-mod_sofia/1.0.1-exported.


Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH.


Supported: 100rel, timer, precondition, path, replaces.


WWW-Authenticate: Digest realm="4.53.88.29", nonce="b59a58b1-bdc6-4487-b346-12838168039d", algorithm=MD5, qop="auth".


Content-Length: 0.


.



_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org







_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



Brian West

[url=sip:brian@freeswitch.org]sip:brian@freeswitch.org[/url]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services