Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] X100P Woes


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
Smither at C-C-I.com
Guest





PostPosted: Fri Jan 04, 2008 5:39 pm    Post subject: [asterisk-users] X100P Woes Reply with quote

On Wed, 2007-12-26 at 17:47 +0200, Tzafrir Cohen wrote:
Quote:
On Wed, Dec 26, 2007 at 08:38:31AM -0600, Bob Smither wrote:
Quote:
On Wed, 2007-12-26 at 07:27 +0200, Tzafrir Cohen wrote:

Quote:
Just to stress the point: you mention that you don't see the card on
lspci. If this is so: the problem is not with Zaptel - it is below.
Zaptel doesn't even get a chance.

Thanks Tzafrir. The last thing I tried was to downgrade Zaptel and
during the boot, Zaptel reported success(*).

What version of Zaptel reported success? Which version has failed?

After some frustrating times, I began to suspect the cards. Doing more
careful testing, keeping track of the cards, confirmed that two of four
cards I was trying had problems. I am able to get the two working cards
to be properly configured and they seem to work well.

Thanks for the trouble shooting suggestions from this list!

One last question if someone has an answer - Using Kwelstart signaling *
can detect incoming calls and can detect hang ups, but doesn't seem to
be able to detect when an outgoing (over a Zap channel) call is
answered. Is this correct, or have I not configured something?

I am comparing this to what I have seen with IAX channels. When using
call files, when the IAX channel answers that event in noted on the CLI.
I don't see this with the Zap channel using call files.

Thanks!
Back to top
tzafrir.cohen at xorco...
Guest





PostPosted: Fri Jan 04, 2008 5:47 pm    Post subject: [asterisk-users] X100P Woes Reply with quote

On Fri, Jan 04, 2008 at 04:39:44PM -0600, Bob Smither wrote:

Quote:
One last question if someone has an answer - Using Kwelstart signaling *
can detect incoming calls and can detect hang ups, but doesn't seem to
be able to detect when an outgoing (over a Zap channel) call is
answered. Is this correct, or have I not configured something?

Right. This is a known limitation.

--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
Back to top
vincent.delporte at bi...
Guest





PostPosted: Sun Jan 06, 2008 9:50 am    Post subject: [asterisk-users] X100P Woes Reply with quote

On Fri, 04 Jan 2008 16:39:44 -0600, Bob Smither <Smither at C-C-I.com>
wrote:
Quote:
After some frustrating times, I began to suspect the cards. Doing more
careful testing, keeping track of the cards, confirmed that two of four
cards I was trying had problems.

I had the same issue with three brand new, identical cards. Some were
DOA.

Quote:
Thanks for the trouble shooting suggestions from this list!

Generally speaking, X100/101P cards are a waste of time. If you don't
want to spend the money to buy a Sangoma or even a Digium, OpenVox
makes nice clones of Digium for less money. I bough the
single-FXO-port model for $80.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services