Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] [Asterisk 1.2 + TDM FXO] Incoming call not


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
vincent.delporte at bi...
Guest





PostPosted: Mon Jan 07, 2008 2:02 pm    Post subject: [asterisk-users] [Asterisk 1.2 + TDM FXO] Incoming call not Reply with quote

Hi

On an old IBM Netvista thinclient, the TDM card doesn't detect
incoming calls, although the card seems to be detected, and correctly
configured:

pbx asterisk # lspci
00:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface

# cat /etc/zaptel.conf
fxsks=1
loadzone=fr
defaultzone=fr

# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.

# zttool (with the phone line plugged into the FXO port)
OK Wildcard TDM400P REV E/F Board 1
=> Select
Current Alarms: No alarms.
IRQ Misses: 0
Bipolar Viol: 0
Tx/Rx Levels: 0/ 0
Total/Conf/Act: 0/ 0/ 0

There is dialtone on the line, and the green LED is lit up after
loading the Zaptel driver, but when I connect to Asterisk, nothing is
reported when I call into the FXO port.

Is the motherboard not compatible with this PCI card? Are there
settings I can try to get the card to detect the call?

Thank you.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services