VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
jbr at consiglia.dk Guest
|
Posted: Mon Aug 25, 2008 3:45 pm Post subject: [Freeswitch-users] Project "Commercial PBX using FreeSW |
|
|
I have a dream, said M. L. King.
And so do I: To create a commercial alternative to Avaya, Cisco BroadSoft and others based on open source components.
At this stage, I’m investigating different possibilities including the FreeSWITCH platform before a prospect is with the aim of raising 2-5 mio. USD for the initial steps to create ready-to-go-IP-PBX-package for big enterprises and telcos.
I have a number of questions regarding the possibilities of the FreeSWITCH, and I have chosen to use this community to share the questions.
Question 2:
What are the possibilities to establish carrier grade system using the FreeSWITCH?
In practice this requirement will need a setup, where there is a redundant server, which takes over, if the prime server fails, including all the management software which reacts correctly on failure signals from the prime server!
Thanks
Jon
Consiglia Telecommunications
Hulsøvang 16
2960 Rungsted Kyst
45 16 1000
CVR: 27 04 78 82
www.consiglia.dk |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jbr at consiglia.dk Guest
|
Posted: Mon Aug 25, 2008 3:47 pm Post subject: [Freeswitch-users] Project "Commercial PBX using FreeSW |
|
|
I have a dream, said M. L. King.
And so do I: To create a commercial alternative to Avaya, Cisco BroadSoft and others based on open source components.
At this stage, I’m investigating different possibilities including the FreeSWITCH platform before a prospect is with the aim of raising 2-5 mio. USD for the initial steps to create ready-to-go-IP-PBX-package for big enterprises and telcos.
I have a number of questions regarding the possibilities of the FreeSWITCH, and I have chosen to use this community to share the questions.
Question 3:
My experience with Asterisk has proven that the ability to monitor DTMF after calls have been bridges is very useful. With this facility you can transfer a call by pressing DTMF # or another predefined digit from any type of phone.
Is this possible with FreeSWITCH? And how?
Further if it is possible, what is the cost in terms of CPU?
Thanks
Jon
Consiglia Telecommunications
Hulsøvang 16
2960 Rungsted Kyst
Denmark
45 16 1000
CVR: 27 04 78 82
www.consiglia.dk |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jbr at consiglia.dk Guest
|
Posted: Mon Aug 25, 2008 3:48 pm Post subject: [Freeswitch-users] Project "Commercial PBX using FreeSW |
|
|
I have a dream, said M. L. King.
And so do I: To create a commercial alternative to Avaya, Cisco BroadSoft and others based on open source components.
At this stage, I’m investigating different possibilities including the FreeSWITCH platform before a prospect is with the aim of raising 2-5 mio. USD for the initial steps to create ready-to-go-IP-PBX-package for big enterprises and telcos.
I have a number of questions regarding the possibilities of the FreeSWITCH, and I have chosen to use this community to share the questions.
Question 1:
Well, as this project is likely to be quite expensive, why create needles competition? So if anybody is working on a similar project it might be better to cooperate than compete! So please let me hear if you know about any similar project!
Thanks
Jon
Consiglia Telekommunikation
Hulsøvang 16
2960 Rungsted Kyst
45 16 1000
CVR: 27 04 78 82
www.consiglia.dk |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|